Banner

The Restricted Driveway Security Gate Solution | More room to park vehicles inside your driveway | Less space needed beside and around the gate entrance | A smarter way to open your driveway and keep vehicles and your home secure

A short driveway should not mean choosing between electric gates and somewhere practical to park. When swing gates would open into your parking space, and a standard sliding gate has nowhere to go, a telescopic electric driveway gate offers an ideal alternative.

Instead of moving as one long panel, the gate opens in overlapping sections that slide neatly alongside one another. You keep the clear vehicle entrance you need while using considerably less space along the boundary.

The result is a smooth, secure and rather impressive entrance that makes excellent use of a difficult space.

Arrange a site survey - Send photographs and approximate measurements

 

What Is a Telescopic Electric Gate?

A sliding entrance gate that needs less space

A conventional sliding gate moves across the entrance as one complete panel. To open fully, it needs a full clear area beside the driveway long enough to accommodate the gate, together with the necessary operating allowances.

A telescopic gate divides the entrance into two or more moving panels. A synchronising mechanism coordinates their movement so they overlap as they open, gathering into a shorter space beside the driveway. Think of modern elevator doors as an example of this..

With a suitable two panel arrangement, the space occupied by the open panels can approach half the entrance width. However, the complete installation needs additional room for overlaps, posts, guides, stops and safety clearances. We confirm the exact requirement for your chosen gate and driveway during the design process.

This telescopic concept can make an electric sliding entrance possible where a single full width gate simply would not fit.

AGD Systems designs, supplies and professionally installs telescopic electric entrance gates for homes and residential developments across the Midlands, London and the Home Counties. From premium Kostum aluminium designs to bespoke gate systems, we help you find an entrance that suits both your property and the way you use it.

Is Your Driveway Suitable?

Designed for entrances where every metre matters

Telescopic gate operation is particularly worth considering when:

  • A parked car would prevent swing gates from opening.
  • Your driveway has very little depth or width behind the entrance.
  • There is some space along the boundary, but not enough for a conventional sliding gate.
  • The driveway rises behind the entrance, restricting inward opening gates.
  • You want to retain as much parking and turning space as possible.
  • A narrow entrance accessing the side of the property.

The important distinction is that a telescopic gate needs less side space, not no side space. It still requires a suitable area for the overlapping panels and their protected movement zone.

We assess the entrance as a whole, including its width, ground levels, boundaries and everyday use. If another configuration would work better, we explain the alternatives rather than trying to make an unsuitable gate fit.

Telescopic vs Standard Sliding Gates

How the space requirements compare

FeatureStandard sliding gateTelescopic sliding gate
Moving panels One main panel Two or more overlapping panels
Space for a swing arc Not required Not required
Space beside the entrance Accommodates the full gate panel, plus operating allowances Reduced because the panels overlap
Open position One long panel beside the driveway A shorter group of panels beside the driveway
Ground arrangement Tracked or cantilever Commonly tracked, with specialist cantilever options available
Mechanical arrangement Comparatively straightforward Additional guides and coordinated panel movement
Main advantage Practical where sufficient side space is available Sliding operation where side space is restricted

Both arrangements preserve the space immediately behind the entrance because neither swings into the driveway. Telescopic operation adds the advantage of needing a shorter clear area along the boundary.

Kostum Telescopic Gates

Premium aluminium designs without compromising driveway space

A restricted entrance does not have to look like a compromise.

Kostum aluminium gates offer a wide choice of designs, from clean contemporary lines to more traditional styles. Telescopic opening is available within selected Cosy and Fresk, Archy and Trady collections, subject to the model, dimensions and installation requirements.

Depending on your chosen design, options can include:

  • Solid panels for greater privacy.
  • Open or partially open slats.
  • Horizontal or vertical detailing.
  • Decorative openwork.
  • Traditional styling.
  • Coordinating pedestrian gates and fencing.
  • A broad choice of powder coated colours and selected wood effect finishes.

The aim is to create an entrance that belongs with your property, rather than allowing the opening mechanism to dictate the gate appearance.

Selected Kostum aluminium ranges carry manufacturer warranties of up to 30 years for manufacture and powder coating. Cover depends on the product and warranty conditions, including location and maintenance requirements. Motors, hardware and accessories have separate warranties, which we confirm with your specification.

Made to Fit the Property

Bespoke solutions for awkward layouts

Some driveways need more than a different gate size. Existing walls, narrow side returns, unusual entrance angles and changes in ground level can all influence how the system should be designed.

Illustration of a partly open telescopic sliding gate with overlapping panels.

A bespoke approach allows us to consider the opening arrangement alongside the gate material, appearance, pedestrian access and surrounding boundary. Where appropriate, this can include a different panel configuration, bespoke steel or aluminium construction and matching fencing.

Privacy and wind exposure also need to be considered together. A solid gate provides greater screening, but its surface area affects the loads that the structure and automation must accommodate. Open or partially open designs may be more appropriate in some exposed positions.

We bring these decisions together before manufacture, so the finished entrance looks right and operates as it should.

Security When the Gates Are Closed

A strong sliding barrier across your entrance

Sliding gates have a useful security advantage built into their design. Rather than pivoting on hinges, the gate panels are retained within a guided sliding arrangement. When properly supported and fully closed, this gives them a natural resistance to being pushed or forced open.

Illustration of a closed telescopic privacy gate with a driveway intercom.

Telescopic gates retain this advantage. Their overlapping panels close together to form a substantial physical barrier, making them a strong choice where you want security without sacrificing valuable driveway space.

The final level of protection depends on the complete installation, including the panel construction, guides, supporting posts, closing detail and locking arrangements. We consider these together with your access controls, so convenience does not come at the expense of a secure entrance.

Automation and Access Control

Easy access for you. Controlled access for everyone else.

Your gates should fit the way you use your home.

You may want to open them from the car, speak to visitors before admitting them, or provide access for family members and regular deliveries. Depending on the selected system, options can include:

  • Remote control handsets.
  • Keypad entry.
  • Audio or video intercoms. Facial recognition intercom technology
  • Mobile phone or compatible app control.
  • Compatible smart home integration.
  • Vehicle detection for automatic exit.
  • Automatic closing. Partial opening for pedestrian access only
  • A manual release for use during a power failure.
  • Battery backup where supported.

We help you decide who needs access, how visitors will announce themselves and how everyone will leave. These details make the difference between a gate that simply opens and an entrance that works comfortably every day.

The automation is selected to suit the gate construction, moving weight, frequency of use and site conditions, not simply the width of the opening.

Explore Access Control Systems

Survey, Groundworks and Installation

The engineering behind smooth operation

A telescopic gate relies on several panels moving accurately together. The foundations, supports, guides and automation must work as one system, with the surrounding ground and drainage properly considered.

Our approach starts with your driveway, not just a gate design:

  1. Discuss your requirements and review photographs and approximate dimensions.
  2. Survey the entrance, available side space and ground levels.
  3. Agree the opening arrangement, appearance and access controls.
  4. Confirm the foundations, drainage, ducting and power requirements.
  5. Manufacture and finish the gate.
  6. Install the mechanical and electrical equipment.
  7. Complete safety assessment, testing, commissioning and handover.
  8. Explain operation, manual release and ongoing maintenance.

We establish the scope of the preparation work before installation, including any responsibilities shared with your builder or electrician. This helps avoid uncertainty over foundations, power supplies and other essential work.

A Complete, Compliant Driveway Gate System

Safety designed around your entrance

An electric gate is powered machinery. Its safety depends on the completed installation, not simply on choosing a motor with safety features.

Telescopic gates have several moving interfaces between panels, guides and fixed structures. These areas need careful assessment to address potential trapping, crushing and other movement hazards.

Depending on the entrance, the safety design may include:

  • Guarding around accessible moving parts.
  • Monitored safety edges.
  • Photocells or other presence detection.
  • Controlled operating forces.
  • Protected areas beside the driveway.
  • Secure stops and a suitable manual release.

The completed gate must be assessed as one system, with the safety measures selected for the people and vehicles likely to use the entrance.

At handover, you should receive the relevant conformity documentation, operating instructions and maintenance information, together with an explanation of normal operation and manual release.

Will Planning Permission Be Needed?

Check before finalising your gate

For a new entrance gate in England, planning permission is often required if it will exceed:

  • One metre in height next to a highway used by vehicles, or the footpath of that highway.
  • Two metres in height elsewhere.

Different provisions can apply when altering or replacing an existing gate without increasing its height. Listed buildings, boundaries adjoining listed properties, planning conditions and Article 4 directions can also affect what is permitted.

As many driveway gates exceed one metre, checking with the local planning authority early can avoid unnecessary redesign. Shared residential entrances may also need approval from the relevant freeholder or management company.

AGD can provide information and drawings for the proposed gate, but planning requirements remain specific to the property.

How Much Does a Telescopic Gate Cost?

A quotation based on what your entrance needs

A telescopic gate generally costs more than a comparable single panel sliding gate because it is a more involved system. Multiple panels, synchronising components and additional guides all need to be designed, installed and protected correctly. The overall package is key to reliability and safety over many years.

A typical fully installed price range is between £17,000 and £25,000 depending on the final gate design, size and work required around the gate system.

Your quotation will depend on:

  • Entrance width and gate height.
  • Number of moving panels required in the gate system
  • Material, design and final design and finish.
  • Ground levels and foundation requirements.
  • Standard tracked or specialist cantilever construction.
  • Wind exposure and privacy requirements.
  • Automation, safety equipment and access controls required.
  • Power provision, drainage and associated building work.
  • Matching pedestrian gates or fencing.

Photographs and approximate measurements help us discuss an initial budget for you which is often pretty accurate. A site survey then allows us to establish a totally accurate specification and explain what is included.

The value of a telescopic system is not simply in its opening mechanism. It is in making a secure, convenient entrance possible without giving up the driveway space you need.

Telescopic Gate Installation Across the Midlands, London and Home Counties

Start with your driveway

AGD Systems is based in Wellingborough and has supplied and installed electric entrance systems since 1986. We work with homeowners and residential developments across the Midlands, North London and the Home Counties, with wider coverage considered for suitable projects.

For an initial assessment, send us:

  • A photograph looking into the driveway from outside.
  • A photograph looking towards the entrance from inside.
  • The approximate clear entrance width.
  • The available space to each side.
  • The driveway depth and details of any slope.
  • Any preferred gate styles or privacy requirements.

These details help us identify the most promising opening arrangement before a detailed survey.

Discuss your restricted driveway

Arrange a site survey

Telephone: 01933 229123

Email: enquiries@agdsystems.co.uk

Telescopic Electric Gate FAQs

How does a telescopic electric gate work?

Two or more sliding panels move in a coordinated sequence, overlapping beside the driveway as they open and extending across the entrance as they close. This reduces the side space needed compared with one full width sliding panel.

How much side space does a telescopic gate need?

It depends on the number of panels and the selected mechanism. In a suitable two panel arrangement, the open panels can occupy around half the entrance width, but the complete system needs additional allowances for overlaps, supports, automation and safety clearances. We confirm the actual requirement through the design and survey process.

Can telescopic gates open to either side?

Many designs can be arranged to open to the left or right. The preferred direction depends on the available boundary space, ground conditions, pedestrian access and safety requirements.

You can also have a bi parting arrangement opening to either direction and particularly useful when side space is really restricted either side

Can telescopic gates have three panels?

Yes. Three panel arrangements can reduce the space occupied by the open panels further. They also introduce additional guides and moving interfaces, so the system must be designed around the particular entrance.

Does the gate need a ground track?

Many telescopic gates use ground tracks, but specialist telescopic cantilever systems also exist. These keep the vehicle passage clear of a ground track, although they have different support, foundation and space requirements.

Are telescopic gates secure?

Yes, a properly specified telescopic gate can provide a strong, secure entrance. Like other sliding gates, its guided construction offers a natural resistance to being forced open. The overall security depends on the panels, supports, closing arrangement, locking and access controls working together.

Can a telescopic gate provide privacy?

Yes. Suitable solid gate designs can provide a high level of screening. The specification must also account for gate size, wind exposure, structural support and automation, so privacy is considered as part of the complete design.

Can it work on a sloping driveway?

A sliding arrangement can avoid the clearance problems that a rising driveway creates for inward opening gates. However, the levels along the gate’s travel still need assessment. A survey is required before confirming that a particular system will work.

What happens during a power cut?

The installation should include a manual release so authorised users can operate the gate when power is unavailable. The release arrangement needs to suit the entrance and remain accessible. Battery backup may also be available with a compatible automation system.

Are telescopic electric gates safe?

They can be when the complete installation is properly designed, assessed, installed, tested and maintained. Safety must cover the moving panels and their interaction with posts, boundaries and accessible areas, not just the main closing edge.