Automatic driveway gates should make arriving home safer and easier. They should suit your property, move smoothly and always work reliably with the controls, locking and safety equipment around them. They should also make your gate secure when closed
Achieving that starts with choosing the actual gates and automation equipment together.
You do not need to know which exact motor to buy or how powerful it should be. AGD Systems assesses your entrance, explains the options and takes care of the complete specification. We recommend the gate and motor combination that suits your property, its surroundings and the way you will use it along with the mandatory safety systems also required to make your electric gates compliant and certified. All our automated entrance gate systems are made to order and specific to each entrance for optimal overall performance and visual appearance.
Gates, automation and access control, specified together for your entrance.
Your priorities might be privacy, security, keeping pets and children safe inside, easier access or simply an entrance that looks right for your home, co-ordinated with perimeter walls or fencing.
Our job is to turn those priorities into a suitable and reliable automatic gate system.
We consider the gate design and dimensions, the available opening space, the supporting posts or piers, wind exposure and how frequently the gates will operate. We then specify the motors, mounting arrangements, locking, controls and all safety measures needed.
If your preferred design presents a practical difficulty, we explain it early and recommend an alternative. That might mean a different motor arrangement, an adjustment to the gate design or a different way of opening.
The aim is not to sell you the biggest motor. It is to provide the right complete system.
There are also some very clever new types of electric gate motors available to overcome site issues or special requirements.
A motor cannot be chosen properly from gate weight alone.
A wide, solid timber gate on an exposed driveway behaves differently from an open railing gate in a sheltered location. Both may be suitable for automation, but they need different considerations in their motor specifications even if they are both the same sizes.
Hinge positions also matter. So do uneven driveway slopes, nearby walls, drainage and the space available behind or beside the entrance for gate movement
Choosing gates without considering these details can restrict the automation options or lead to additional work later.
AGD Systems brings the decisions together from the outset with over 40 years of experience.. This helps avoid a gate design that looks ideal on paper or on a computer screen, but is difficult to automate at your property.
Electric gates of any worth are built to suit the motors they are using for automation and this is a large failure with buying standard gates online and the equipment separately.
We assess the whole entrance, not just the weight of the gates.
There are four main arrangements for swing gates: surface mounted rams, articulated arms, underground motors and motors integrated into the gate structure.
Sliding gates use a different drive arrangement beside the entrance. Bi-folding gates need automation matched to their folding mechanism.
The following sections explain what each option looks like and why we might recommend it. You do not need to select one yourself before contacting us.
A practical choice for many swing gates in the UK
Surface mounted rams attach to the gate post or pier and the inside face of the gate. They push and pull the gate through its opening movement. You can use electromechanical drives or hydraulic drive motors depending on the requirements on site
They are often a practical and economical option, with straightforward access for inspection and maintenance over time.
On solid gates, the equipment may be largely hidden from the road. On open railing gates, it is more visible and this can be a consideration for many.
The important detail is where the operator can be mounted. The relationship between the hinges and mounting brackets affects movement, leverage and the opening angle. Apply the massive forces in the right place for optimal efficiency and reliability
AGD Systems checks the positions before recommending a ram. If you are building new gate entrance piers, involving us before their construction can help avoid dimensions that limit the available options.
A surface-mounted ram connects the gate to its supporting post or pier.
Useful for some recessed hinge positions An articulated gate motor arm has a jointed shape, rather like an elbow.
It can suit some entrances where the hinges sit back within a substantial pier and a straight ram cannot achieve the required mounting arrangement.
The arm needs space to move behind the gate. Nearby walls, fences and other obstructions must therefore be considered.
AGD Systems checks the available clearance and the gate dimensions before deciding whether an articulated arm is appropriate. They are not usually as powerful as a piston type ram so usually seen on smaller or lighter weight gates.
The jointed arm can accommodate some entrances with recessed hinges.
Discreet automation for swing gates.
They are popular where discreet equipment is important, particularly with ornamental steel gates or designs where a visible operator would interrupt the appearance.
They also allow a far greater degree of gate movement if the gate needs to go way beyond a 90 degree opening cycle.
Underground motors sit beneath the hinge positions in foundation boxes. A connection transfers movement from the operator to the gate.
The motor is concealed, although the foundation box lid and parts of the hinge connection may remain visible at ground level.
Groundwork and drainage are central to the specification. AGD Systems assesses driveway levels, surface water and ground conditions before recommending an underground system.
Where effective drainage cannot be provided, we will advise on another arrangement rather than recommend underground automation simply for its appearance.
Discreet above ground, carefully planned below it.
Automation built into the gate
Selected Kostum aluminium swing gates are available with Somfy integrated automation.
The motors are incorporated into the gate uprights during manufacture, avoiding visible surface-mounted operators and underground motor boxes.
This is an attractive option if you want a clean, coordinated entrance with the automation concealed.
The gate design, motor version, locking and opening arrangement need to be considered when the gates are ordered. AGD Systems takes care of that specification and confirms the suitable options for your entrance.
Integrated automation is not simply an accessory to choose afterwards. It is part of the gate system from the beginning.
The motor is incorporated into the gate, keeping the finished entrance uncluttered.
An alternative when swing space is limited and also one of the best all round for simplicity, low maintenance and reliability.
Sliding gates move sideways instead of swinging into the driveway.
They can be useful where there is limited room behind the entrance, provided there is enough space beside it for the gate to open.
The motor normally sits beside the opening. A drive gear engages with a toothed rack fixed along the gate.
AGD Systems considers the complete gate weight, movement resistance, opening space and frequency of use when specifying the equipment.
A tracked gate runs on wheels along a rail across the entrance. It needs suitable foundations, levels and a track that can be kept clear.
A cantilever gate is supported beside the opening, leaving no running track across the driveway. It needs additional side space and appropriately designed foundations.
Telescopic gates use linked panels that overlap as they open. They can reduce the side space needed compared with a conventional single sliding gate.
We assess which arrangement suits the entrance rather than assuming every sliding gate works in the same way.
Sliding arrangements need different amounts of space beside the entrance.
An option for some shorter driveways
Bi-folding gates use hinged panels that fold together as they open.
They can reduce the depth needed behind the entrance compared with conventional swing gates. This can help where parking space is limited and a sliding gate is not practical.
The motor, hinges and folding mechanism must be specified together. The movement also creates additional trapping points that require careful assessment.
AGD Systems checks the complete opening area and recommends the appropriate equipment and protective measures.
Folding panels can reduce the depth needed behind the entrance.
A solid swing gate catches more wind than an open design. Wider leaves also give the wind greater leverage around the hinges. That means two entrance gates with similar dimensions and weight can need different automation.
AGD Systems considers the gate infill and the exposure of your property together. We may recommend a different operator, suitable additional locking, a more open design or another gate arrangement.
A more powerful motor is not always the answer. The complete system must remain appropriate for the site and its safety requirements.
Sliding gates can be worth considering at exposed entrances, but their guides, supports and foundations still need to withstand wind loads.
Choosing the motor is not the end of the specification process.
The gates need suitable locking, practical access controls and protection against the hazards created by their movement.
AGD Systems considers these requirements alongside the gate and motor choice. We assess the closing edges, hinges, surrounding structures and areas where moving panels could trap someone.
Protective measures depend on the installation. Photocells, safety edges, guarding and controlled movement have different roles; no single accessory protects every danger point.
Security also depends on more than the motor. Gate construction, supports, locks and access arrangements all contribute to the finished entrance.
Safety and access equipment are selected to suit the complete installation.
We also plan how you will use the gates when something does not go to plan.
That includes emergency manual release during a power cut or fault, access to any additional locks and compatible battery backup where appropriate.
If the gates are your only entrance, emergency release access needs particular attention.
At handover, we explain normal operation, the release procedure and the maintenance requirements. You should understand how to use your gates without needing to understand their internal engineering.
Regular servicing remains important. Wear, ground movement, water and changes in gate materials can affect operation over time.
The best time is before the gates are ordered or the entrance is built.
Early advice helps coordinate the gate design, pier dimensions, foundations, cable routes and driveway work. It can also identify whether a proposed opening arrangement is practical.
If you already have gates, we can assess whether they are suitable for automation and explain any alterations needed.
You do not need to arrive with a motor model in mind. A photograph of the entrance and an outline of what you want to achieve are a useful starting point.
Clear advice starts with understanding your gates and your property.
A good motor specification starts with the right questions. When our surveyor visits, we look at:
We install and service gate motors from FAAC, DEA, Somfy, CAME and BFT, together with the Somfy integrated motors available with Kostum gates. Each manufacturer has particular strengths, from FAAC's long standing hydraulic expertise to Somfy's connected home control and the compact underground and electromechanical ranges from CAME, BFT and DEA. Where a project calls for something specialist, we also work with other leading brands. Because we are not tied to one manufacturer, our recommendation is based on what suits your gates, not on what we happen to stock.
No. AGD Systems assesses the gates and site conditions, recommends suitable equipment and takes care of the technical specification. The reasons for the selection can be explained and is crucial to long term reliability and safety.
It is better to consider both together. Gate dimensions, design and hinge positions influence the automation, so early advice helps avoid unnecessary compromises.
Often it is possible, subject to their condition and suitability. We assess the gates, supports, hinges and available space before recommending a solution.
Not necessarily. Hidden motors offer a different appearance, but suitability depends on the gate design, site conditions and installation requirements.
Not automatically. The gates, motor, mounting, locking and exposure need to be assessed together. Increasing operating force is not a substitute for a suitable specification.
Yes. Involving AGD Systems early helps establish suitable dimensions, foundations, drainage and service routes. Gate piers are often built without correct incorporation for the electric gate hinge fixing along with any gate motors used. Speak to us first.
Yes. Our handover covers normal use, controls, release arrangements and the information needed to look after the system. We also look after you after the installation and have done for over 40 years with our customers.
The right automatic entrance gates start with the right specification.
AGD Systems considers the gates, motors, site conditions, locking, controls and safety measures as one complete system. We explain your options clearly and take care of the technical decisions, so you can choose your entrance with confidence.
Whether you are planning new gates or automating an existing entrance, contact AGD Systems for practical advice and a specification suited to your property.
Contact AGD Systems to arrange your entrance assessment.