- Photo Gallery
- Swing Gates
- Sliding Gates
- Operating Systems
- Access Control Systems
- Traffic Control Systems
- Installation Services
- Full Maintenance & Repair Service
- Gate Express
- Case Studies
Shown below is a classic example of a Gate Express installation.
AGD Systems arranged the groundworks, the concrete pads and the backfilling with concrete.
| Stage 1 The site is prepared for the arrival of the gates. Power cables are in place and the concrete pads are in place for the gate post to secure to. |
 |
|
Stage 2 The Gate Express System arrives on a lorry with everything prepared for installation. |
 |
|
Stage 3 The Gate system is carefully hoisted off the lorry to be positioned onto the concrete pads. |
 |
|
Stage 4 The gate system is now in place and secured, power is now connected and system operated and tested. |
 |
|
Stage 5 Concrete is now poured into the hole to finish the ground levels and secure everything into place.
|
 |
| This particular Gate Express was ordered to have stone erected around the steel gate posts. This was carried out by the builder to finish the overall installation.
|
 |
Another simple Gate Express installation next to a pedestrian path. This time tarmac was cut, concrete pads created and then once the gates were installed it was just refinishing the ground and a layer of tarmac topping put down. These particular gates were ordered with finished gate posts in black powdercoat.
2 more examples of Gate Express installations one in progress and one finished.
